TVP5150AM1 - [ TVP5150AM1 ]
Digital IC Shop
TVP5150AM1 - [ TVP5150AM1 ]
1,500Ft
Features
• Accepts NTSC (J, M, 4.43), PAL (B, D, G, H, I, • Standard Programmable Video Output Formats
M, N, Nc), and SECAM (B, D, G, K, K1, L) Video – ITU-R BT.656, 8-Bit 4:2:2 With Embedded
• Supports ITU-R BT.601 Standard Sampling Syncs
• High-Speed 9-Bit Analog-to-Digital Converter – 8-Bit 4:2:2 With Discrete Syncs
(ADC) • Macrovision™ Copy Protection Detection
• Two Composite Inputs or One S-Video Input • Advanced Programmable Video Output
• Fully Differential CMOS Analog Preprocessing Formats
Channels With Clamping and Automatic Gain – 2× Oversampled Raw Vertical Blanking
Control (AGC) for Best Signal-to-Noise (S/N) Interval (VBI) Data During Active Video
Performance – Sliced VBI Data During Horizontal Blanking
• Ultralow Power Consumption or Active Video
• 48-Terminal PBGA Package (ZQC) or • VBI Modes Supported
32-Terminal TQFP Package (PBS) – Teletext (NABTS, WST)
• Power-Down Mode: <1 mW – Closed-Caption Decode With FIFO and
• Brightness, Contrast, Saturation, Hue, and Extended Data Services (XDS)
Sharpness Control Through I
2C – Wide Screen Signaling, Video Program
• Complementary 4-Line (3-H Delay) Adaptive System, CGMS-A, Vertical Interval Time
Comb Filters for Both Cross-Luminance and Code
Cross-Chrominance Noise Reduction – Gemstar 1x/2x Electronic Program Guide
• Patented Architecture for Locking to Weak, Compatible Mode
Noisy, or Unstable Signals – Custom Configuration Mode That Allows
• Single 14.31818-MHz Crystal for All Standards User to Program Slice Engine for Unique VBI
• Internal Phase-Locked Loop (PLL) for Data Signals
Line-Locked Clock and Sampling • Power-On Reset
• Subcarrier Genlock Output for Synchronizing • Industrial Temperature Range
Color Subcarrier of External Encoder (TVP5150AM1I): –40°C to 85°C
• 3.3-V Digital I/O Supply Voltage Range • Qualified for Automotive Applications
(AEC-Q100 Rev G – TVP51
Buy Now : https://www.digitalicshop.com/product_info.php?products_id=&language=en
Features
• Accepts NTSC (J, M, 4.43), PAL (B, D, G, H, I, • Standard Programmable Video Output Formats
M, N, Nc), and SECAM (B, D, G, K, K1, L) Video – ITU-R BT.656, 8-Bit 4:2:2 With Embedded
• Supports ITU-R BT.601 Standard Sampling Syncs
• High-Speed 9-Bit Analog-to-Digital Converter – 8-Bit 4:2:2 With Discrete Syncs
(ADC) • Macrovision™ Copy Protection Detection
• Two Composite Inputs or One S-Video Input • Advanced Programmable Video Output
• Fully Differential CMOS Analog Preprocessing Formats
Channels With Clamping and Automatic Gain – 2× Oversampled Raw Vertical Blanking
Control (AGC) for Best Signal-to-Noise (S/N) Interval (VBI) Data During Active Video
Performance – Sliced VBI Data During Horizontal Blanking
• Ultralow Power Consumption or Active Video
• 48-Terminal PBGA Package (ZQC) or • VBI Modes Supported
32-Terminal TQFP Package (PBS) – Teletext (NABTS, WST)
• Power-Down Mode: <1 mW – Closed-Caption Decode With FIFO and
• Brightness, Contrast, Saturation, Hue, and Extended Data Services (XDS)
Sharpness Control Through I
2C – Wide Screen Signaling, Video Program
• Complementary 4-Line (3-H Delay) Adaptive System, CGMS-A, Vertical Interval Time
Comb Filters for Both Cross-Luminance and Code
Cross-Chrominance Noise Reduction – Gemstar 1x/2x Electronic Program Guide
• Patented Architecture for Locking to Weak, Compatible Mode
Noisy, or Unstable Signals – Custom Configuration Mode That Allows
• Single 14.31818-MHz Crystal for All Standards User to Program Slice Engine for Unique VBI
• Internal Phase-Locked Loop (PLL) for Data Signals
Line-Locked Clock and Sampling • Power-On Reset
• Subcarrier Genlock Output for Synchronizing • Industrial Temperature Range
Color Subcarrier of External Encoder (TVP5150AM1I): –40°C to 85°C
• 3.3-V Digital I/O Supply Voltage Range • Qualified for Automotive Applications
(AEC-Q100 Rev G – TVP51
The product data sheet can be downloaded by clicking here