DM9010EP - [ DM9010EP (A3) ]
Digital IC Shop
DM9010EP - [ DM9010EP (A3) ]
2,500Ft
The DM9010 is a fully integrated and cost-effective single chip Fast Ethernet MAC
controller with a general processor interface, a 10/100M PHY and 16K Byte SRAM.
It is designed with low power and high performance process that support 3.3V with
5V tolerance.
The DM9010 also provides a MII interface to connect HPNA device or other
transceivers that support MII interface. The DM9010 supports 8-bit, 16-bit and 32-bit
uP interfaces to internal memory accesses for different processors. The PHY of the
DM9010 can interface to the UTP3, 4, 5 in 10Base-T and UTP5 in 100Base-TX. It is
fully compliant with the IEEE 802.3u Spec. Its auto-negotiation function will
automatically configure the DM9010 to take the maximum advantage of its abilities.
The DM9010 also supports IEEE 802.3x full- duplex flow control. This programming
of the DM9010 is very simple, so user can port the software drivers to any system
easily
Buy Now : https://www.digitalicshop.com/product_info.php?products_id=&language=en
The DM9010 is a fully integrated and cost-effective single chip Fast Ethernet MAC
controller with a general processor interface, a 10/100M PHY and 16K Byte SRAM.
It is designed with low power and high performance process that support 3.3V with
5V tolerance.
The DM9010 also provides a MII interface to connect HPNA device or other
transceivers that support MII interface. The DM9010 supports 8-bit, 16-bit and 32-bit
uP interfaces to internal memory accesses for different processors. The PHY of the
DM9010 can interface to the UTP3, 4, 5 in 10Base-T and UTP5 in 100Base-TX. It is
fully compliant with the IEEE 802.3u Spec. Its auto-negotiation function will
automatically configure the DM9010 to take the maximum advantage of its abilities.
The DM9010 also supports IEEE 802.3x full- duplex flow control. This programming
of the DM9010 is very simple, so user can port the software drivers to any system
easily
The product data sheet can be downloaded by clicking here